About WG Control

WGControl WGControl is an Android app that automatically switches your configured WireGuard tunnel(s) based on your Wi-Fi and Bluetooth connections. Each configured Wi-Fi network can be assigned its own tunnel - or "No VPN" for a direct connection, e.g. your own home network - while separate default tunnels cover an unconfigured Wi-Fi network and mobile data (with an optional dedicated tunnel for roaming). The tunnel is also disabled when connecting to a selected Bluetooth device (e.g., an Android Auto head unit), and everything switches back automatically upon leaving, as soon as an active internet connection is available. **Note:** This project is not affiliated with WireGuard or Jason A. Donenfeld. "WireGuard" is a registered trademark of Jason A. Donenfeld. WGControl merely controls the official WireGuard app via its public, documented broadcast interface. **Note:** ⚠️ This is a vibecode product entirely generated with Claude Sonnet5 ⚠️ allfunctionality has been tested thorroughly by me though. ⚠️ Essential Prerequisites (Four Steps) Step 1: Configure the WireGuard App Open the WireGuard app (com.wireguard.android) and navigate to Settings. Enable **"Allow user-controlled tunnel management"** (the toggle must be green). Step 2: Grant Control Permission to WGControl The permission com.wireguard.android.permission.CONTROL_TUNNELS is not requested automatically and must be…

Release archive