About Crazyfliecontrol2
Connect to Crazyflie 2.x using Bluetooth low energy and both the original
Crazyflie and Crazyflie 2.x using the USB Crazyradio dongle connected with
a USB OTG cable.
Features:
* Control Crazyflie and Crazyflie 2.x using Crazyradio on a USB OTG compatible device
* Control Crazyflie 2.x using Bluetooth LE 4.0
* Control mode configurable
* Control sensitivity configurable
* Axis and button mapping configurable (only for game pad)
* Control Crazyflie using touch controls
* Control Crazyflie using game pad (connected via USB or Bluetooth)
* Control Crazyflie using the device's gyroscope
* Control LED ring effects (requires Crazyflie 2.x and optional LED ring deck)
* Play the Imperial March melody on the buzzer deck (requires Crazyflie 2.x and optional buzzer deck)
* Update Crazyflie using Crazyradio (experimental feature, update via BLE coming soon)
Please note:
This app is designed to control Crazyflie and Crazyflie 2.x. It requires
either a Crazyradio, Crazyradio PA or a Bluetooth LE 4.0 compatible
device running Android 4.4+. Only Crazyflie 2.x can be controlled with
Bluetooth LE. Do not pair the Crazyflie via Bluetooth settings!
Distributors for Crazyflie and Crazyradio can be found on our distributor
list: <a href="https://www.bitcraze.io/buy/local-retailers/">https://www.bitcraze.io/buy/local-retailers/</a>
This app is using JoystickView Widget from mobile-anarchy-widgets
(<a href="https://code.google.com/p/mobile-anarchy-widgets/wiki/JoystickView">https://code.google.com/p/mobile-anarchy-widgets/wiki/JoystickView</a>).
Contributions are welcome!
How to use the bootloader:
<ol>
<li>The list of firmwares should automatically be filled (make sure you have a network connection!)</li>
<li>Select a firmware (make sure you select the right one depending on which Crazyflie you want to update (CF1 or CF2))</li>
<li>Flash firmware (For Crazyflie 1, click on "Flash firmware" and switch on the Crazyflie during the next 10 seconds. For Crazyflie 2, press the ON/OFF switch of the Crazyflie longer than 1.5 second until one blue LED blinks. Then release the button and both blue LEDs should blink. Then click on "Flash firmware")</li>
<li>After a successful flash the Crazyflie will automatically restart in firmware mode and is ready to use.</li>
</ol>
It's nearly impossible to brick the Crazyflie. In case of any problems during flashing, you can always try again or use the PC client to re-flash.
Permissions:
* Photo/Media/Files: This is required to save the firmware files on the device.
* Bluetooth connection information: This is required for connecting to Crazyflie 2.x over Bluetooth.
* Location: This is required for Bluetooth LE scanning since Android 6.0.
